www.ladders999.co.uk
Home
|
Discounts
|
Ordering
|
Delivery
|
Contact
Us
|
About
Us
|
|
SPECIAL
|
GAMIA TIMBER SPIRALS
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
HOW TO SPECIFY YOUR STAIRCASE - GAMIA TIMBER SPIRALS |
||
| STEP 1 - Choose your stair diameter & colour | . | |
|
|
Standard Basic Stair Kit ( 11 or 12 treads ) |
Colour |
| Diam 120cm - Complete 11tread staircase with railing |
Light Grey |
|
| Diam 140cm - Complete 11tread staircase with railing | ||
| Diam 160cm - Complete 11tread staircase with railing | ||
|
|
These spiral stairs can be assembled to turn to left or right (clockwise or anticlockwise), whichever best suits your location. | |
|
|
NEW for 2006 - UNIVERSAL TOP
LANDING PLATFORM |
|
| STEP 2 - Choose your stair height - | |||||
|
Height Options & extra
components required Measure your exact floor-to-floor height (from upper floor level, vertically down to lower floor) & record this height in cm. See chart opposite to see if any Extra Tread Kits are required for your height.
|
Overall Height |
Height of |
No. |
Qty Treads |
Qty |
| 252 - 276 |
21 - 23 |
12 | 11+1 (std) | nil (11tr kit only) |
|
| 273 - 299 | 21 - 23 | 13 | 12+1 | nil (12tr kit only) |
|
| 294 - 322 | 21 - 23 | 14 | 13+1 | 1 (+12tr kit) | |
|
Maximum height for Gamia spirals is 13+1 treads (14 risers) |
|||||
|
IMPORTANT NOTE - if compliance with UK Building Regulations is required, the maximum height allowed for each riser is 22cm. Revised overall heights for each stair size are below - |
||||
| 252 - 264 |
21 - 22 |
12 |
11+1 (std) |
nil (11tr only) | |
| 273 - 286 | 21 - 22 | 13 | 12+1 | nil (12tr only) | |
| 294 - 308 | 21 - 22 | 14 | 13+1 | 1 (+12tr kit) | |
| STEP 3 - Choose your Main Accessories - | Code | ||
|
Main Accessories - add if required - Extra Tread Kits - only needed if so indicated by chart in Step 3, based on your overall height. |
 |
Diam 120cm - Extra Tread Kit complete with railings |
MK9/192 or |
| Diam 140cm - Extra Tread Kit complete with railings |
MK9/194 |
||
| Diam 160cm - Extra Tread Kit complete with railings |
MK9/196 |
||
| Safety Risers pack - may be required in some circumstances |
|
Safety
Risers - pack of 11 - used to reduce the vertical gap between treads to less
than 10cm. (Required by Building Regulations if stairs could be accessed by young children). |
MK9/310 |
| STEP 4 - Choose your optional Top Balustrade components | Code | ||
|
Top Balustrade Kits and
components are optional - add
if required -
The optional Top Balustrade Kits and components can be added to improve the safety and appearance of your staircase. They are designed to surround and guard your upper opening if this is larger than the Top Landing Platform or if the upper opening is a circular hole. |
|||
 |
Balustrade
Kit - for 100cm (1.0m) length - includes 8 balusters & fixings, plus 1
handrail curve and 1 handrail end cap. Note: These do NOT include the top handrail tube - choose this from below. Can be used for straight edge balustrade or curved around a circular opening. Order multiple kits for long runs. |
|
|
 |
Top
Handrail - 300cm (3.0m) straight length - with 1 timber core joining
piece. Used with one or more Balustrade Kits above to complete the straight balustrade length guarding your upper opening. |
|
|
 |
Top
Handrail - 600cm (6.0m) coil - with 1 timber core joining piece. Used with one or more Balustrade Kits above to complete the curved balustrade guarding your upper circular opening (when spiral stair fits through round hole in ceiling). |
|
|
 |
Top
Handrail Accessories - 2 curves + 5 end caps. Used with top handrails to form angled joints and tidy the ends with caps. |
|
|
 |
Baluster-to-Wall
Rigidity Connector - Used for extra strength and rigidity at end of
Balustrade. Sleeves around the baluster and screws into wall. Typically
used at outer end of each balustrade. Recommended. |
|
|
 |
Baluster-to-Baluster Rigidity Connector - Used for extra strength and rigidity at end of Balustrade. Sleeves around two balusters. Typically used to join upper landing balustrade to winding railing on stairs. Recommended. |
|
|
 |
Baluster-to-Floor Rigidity Connector - Used for extra strength and rigidity on Balustrade runs over 1.0m length. Recommended to be fitted every 1.0m max. Can be fitted to upper floor or to vertical face of mezzanine floor level. |
|
|
| STEP 5 - Calculate the price & Order |
|
1/ Print this page -
we suggest you print this page and note the quantity required for each item. |
|
Problems printing? - if
this page will not print within the width of your paper there are two
solutions. 1/ print in landscape format - in your browser menu click >File >Page Setup>(Orientation) Landscape. 2/ reduce the text size - in your browser menu click >View>Text Size>Medium or Smaller or Smallest (whichever fits). It is helpful & saves paper to see a print preview before printing to check if it will print correctly. Click >File>Print Preview. Buttons for these frequently required operations can be added to your toolbar for convenience. On your browser menu click >View>Toolbars>Customise. Select the required button then click >Add. |
|
COMPLIANCE WITH UK BUILDING REGULATIONS - Gamias are not acceptable as a single MAIN staircase but do comply with regulations provided they are used as a secondary staircase or for access to a mezzanine floor or single room + bathroom and/or WC. It is important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. |
| GAMIA TIMBER SPIRALS - VERTICAL DIMENSIONS | ||
|
|
HT | Floor-to-Floor Height (HPS+S) |
| HPS | Floor-to-Ceiling Height (HT-S) | |
| S | Floor Thickness (HT-HPS) | |
| A | Riser Height (HT/Riser No.) | |
| Balustrade
height 1.0m above upper floor level.
Winding handrail height 1.0m above front edge of treads. Riser height (tread-to-tread height) variable according to your Floor-to-Floor height. Minimum 21cm - maximum 23cm (maximum 22cm if complying with UK Building Regulations)
|
||
| GAMIA TIMBER SPIRALS - PLAN DIMENSIONS | |||||
| NOTE: new Universal Top Landing Platform fits all openings and changes some information here | |||||
|
Stair fitted through a circular hole |
Stair fitted to a straight edge |
Stair fitted to a 90 degree corner |
|||
|
|
|
|||
|
STAIR DIAMETER >> |
120cm | 140cm | 160cm | ||
| A | 1250mm | 1450mm | 1650mm | ||
| B | min 1250mm | min 1450mm | min 1650mm | ||
| C | 551mm univ | 638mm univ | 726mm univ | ||
| E | 551mm univ | 638mm univ | 726mm univ | ||
| G | 551mm univ | 638mm univ | 726mm univ | ||
| GAMIA TIMBER SPIRAL STAIRS - technical details |
| Description Modular spiral staircase in steel with round section and adjustable spacers |
| Diameters Stair diameter 1200mm = Well diameter 1250mm. Stair diameter 1400mm = Well diameter 1450mm. Stair diameter 1600mm = Well diameter 1650mm. |
| Number
of steps and "Floor-to-Floor" height 11+1 steps: min 2520mm - max 2760mm (max 2640mm to UK regulations). 12+1 steps: min 2730mm - max 2990mm (max 2860mm to UK regulations). 13+1 steps: min 2940mm - max 3220mm (max 3080mm to UK regulations). |
| Steps Of solid beech wood, thickness 38mm. Steps - 30° angle fan-shaped ; Landing Platforms - new Universal Top Landing Platform fits all openings - appx 60° angle |
| Risers Standard Min 210 - Max 230mm (Max 220mm if complying with UK Building Regulations) |
| Railings With steel metal tubing balusters 22mm diameter ( clear space between the balusters < 100mm ). Flexible plastic handrail ( handrail height 1000mm ) - option for timber |
| Finishes
and colours Wood - polished with water based varnish. Metal - Durable epoxy powder coat ( embossed Black or Dupont Silver Grey). Plastic components & screws - Black. |
| NOTE: new Universal Top Landing Platform fits all openings and changes some information below |
 |
|
click
here for PDF of Gamia Timber (Phola97) Installation Guide |
|
Complete
Staircase delivered FREE UK mainland in a single palletised carton. |
| COMPLIANCE WITH UK BUILDING REGULATIONS - Gamias and Universals are not acceptable as a single MAIN staircase but do comply with regulations provided they are used as a secondary staircase or for access to a mezzanine floor or single room + bathroom and/ or WC. It is important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. |
|
Tel: 0117 935 4664 Fax: 0117 951 5682 e-mail: sales@ladders999.co.uk Lansford
Access
Ltd
Unit
8A
East
Park
Tr.
Estate
Gordon
Road
BRISTOL
BS5
7DR
U.K.
|
