www.ladders999.co.uk
Home
|
Discounts
|
Ordering
|
Delivery
|
Contact
Us
|
About
Us
|
|
SPECIAL
|
UNIVERSAL MAXI U
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
HOW TO SPECIFY YOUR STAIRCASE - UNIVERSAL MAXI U |
||
| STEP 1 - Choose your stair - U shape with width 75mm or 94mm? | Code | |
|
|
75mm overall width - Standard Maxi 75 U Stair Kit ( 12 treads ) - Complete 12tread staircase with railing one side. NOTE: Maxi 75 will not comply with UK Building Regulations for use as a MAIN staircase because its going is only 18cm - 22cm. |
MS220 |
|
94mm overall width - Standard Maxi 94 U Stair Kit ( 12 treads ) - Complete 12tread staircase with railing one side. NOTE: Maxi 94 WILL comply with UK Building Regulations as a MAIN staircase because its going is 22cm - 26cm. |
.MS240 |
|
|
||
| STEP 2 - Choose your stair height - | |||||
|
Height Options & extra
components required Measure your exact floor-to-floor height (from upper floor level, vertically down to lower floor) & record this height in cm. See chart opposite to see if any Extra Tread Kits are required for your height.
|
Overall Height |
Height of |
No. |
No. Treads |
Qty |
| 211 - 306.5 |
17.5 - 24 |
13 | 12 (standard) | nil | |
| 228.5 - 330.5 | 17.5 - 24 | 14 | 13 | 1 | |
| 245 - 354.5 | 17.5 - 24 | 15 | 14 | 2 | |
| 263.5 - 378.5 | 17.5 - 24 | 16 | 15 | 3 | |
|
Maximum height for Universal Maxi is
15 treads (16 risers). Note: heights shown are based on top tread being fitted "below upper floor". If preferred, top tread can be fitted "flush with upper floor" which will then require one Extra Tread Kit more than stated above. |
|||||
|
IMPORTANT NOTE - |
||||
| 211 - 282.5 |
17.5 - 22 |
13 |
12 (std) |
nil | |
| 228.5 - 304.5 | 17.5 - 22 | 14 | 13 | 1 | |
| 245 - 326.5 | 17.5 - 22 | 15 | 14 | 2 | |
| 263.5 - 348.5 | 17.5 - 22 | 16 | 15 | 3 | |
| STEP 3 - Choose your Main Accessories - add if required | Code | ||
|
Extra Tread Kits
- only needed if so
indicated by chart in Step 2, based on your overall height. |
![]() |
Extra Tread
Kit Maxi 75 complete with
railing. |
MJ9/1210 |
|
Extra Tread Kit Maxi
94 complete with
railing. |
MJ9/1230 |
||
| External Railing Kit for 3 treads |
|
External
Railing Kit for 3 treads. - only required if banister is needed on BOTH sides of stair (then order multiple kits as required) or on just the lower treads below the turn. See additional illustration towards bottom of this page. |
MJ9/10110 |
| External Winder Railing Kit |
![]() |
External Winder Railing Kit - normally fitted to close an open side of the winder treads which is not against a wall. See additional illustration towards bottom of this page. |
MJ9/10100 |
| Safety Riser Kit for 13 treads |
![]() |
Safety
Riser Kit for 13 treads - used to reduce the vertical gap between treads to less than 10cm. (Required by Building Regulations if stairs could be accessed by young children). |
MJ9/10060 |
| Lateral Support Kit |
|
Lateral
Support Kit - all Maxi stairs are supplied with a support Floor Post to fit underneath the stair and make it independent of the side wall. Lateral Support Kit is only required if your side wall is of solid construction and if you prefer not to use the Floor Post. |
MJ9/10150 |
| STEP 4 - Choose your optional Top Balustrade components | Code | ||
|
Top Balustrade Kits and
components are optional - add
if required -
The optional Top Balustrade Kits and components can be added to improve the safety and appearance of your staircase. They are designed to surround and guard your upper opening if this is wider than the staircase. |
|||
![]() |
Balustrade
Kit - for 100cm (1.0m) length - includes 8 balusters & fixings, plus 1
solid Beech Handrail. Can be used for straight edge balustrade. Order multiple kits for long runs. |
|
|
| Timber
Handrail Connector Kit. Used with top handrails to form angled joints. |
|
||
![]() |
Baluster-to-Wall
Rigidity Connector - Used for extra strength and rigidity at end of
Balustrade. Sleeves around the baluster and screws into wall. Typically
used at outer end of each balustrade. Recommended. |
|
|
![]() |
Baluster-to-Baluster Rigidity Connector - Used for extra strength and rigidity at end of Balustrade. Sleeves around two balusters. Typically used to join upper landing balustrade to winding railing on stairs. Recommended. |
|
|
![]() |
Baluster-to-Floor Rigidity Connector - Used for extra strength and rigidity on Balustrade runs over 1.0m length. Recommended to be fitted every 1.0m max. Can be fitted to upper floor or to vertical face of mezzanine floor level. |
|
|
| STEP 5 - Calculate the price & Order |
|
1/ Print this page -
we suggest you print this page and note the quantity required for each item (see
printing notes). |
|
Problems printing? - if
this page will not print within the width of your paper there are two
solutions. 1/ print in landscape format - in your browser menu click >File >Page Setup>(Orientation) Landscape. 2/ reduce the text size - in your browser menu click >View>Text Size>Medium or Smaller or Smallest (whichever fits). It is helpful & saves paper to see a print preview before printing to check if it will print correctly. Click >File>Print Preview. Buttons for these frequently required operations can be added to your toolbar for convenience. On your browser menu click >View>Toolbars>Customise. Select the required button then click >Add. |
|
COMPLIANCE WITH UK BUILDING REGULATIONS - Universal Maxi 75 is not acceptable as a single MAIN staircase but does comply with regulations provided it is used as a secondary staircase or for access to a mezzanine floor or single room + bathroom and/or WC. It is important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. Universal Maxi 94 DOES comply with UK regulations as a single MAIN staircase but It is still important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. |
| UNIVERSAL MAXI U - VERTICAL DIMENSIONS | |
|
|
Riser height (tread-to-tread height) variable according to your Floor-to-Floor height. Minimum 17.5cm - maximum 24cm (maximum 22cm if complying with UK Building Regulations) Overall Floor-to-Floor height variable to suit your dimensions. Minimum with all 12 treads 240cm - maximum 288cm ( or maximum 264cm if complying with UK Building Regulations ). Up to three Extra Treads can be added for additional height as shown in Step 2 chart above. Heights quoted are based on top tread being fitted "below upper floor". If preferred, top tread can be fitted "flush with upper floor" which will then require one additional Extra Tread Kit. All MAXI staircase are supplied with a support Floor Post ( illustrated left ), which makes the stair independent of the side wall for support. It should be positioned roughly half-way along the stair. If you prefer not to use this, and your side wall is of solid construction, you can but an optional Lateral Support Kit (see above) as an alternative. |
| UNIVERSAL MAXI U - PLAN DIMENSIONS | |
|
MAXI 75 U |
|
|
|
|
| Stair Tread Width | 69cm |
| Overall Clear Width including railing | 75cm |
| Going of each tread (adjustable) | 18 - 22cm |
| Overall Length of stair (variable according to going and location of winder) | 79cm - 272cm |
|
MAXI 94 U |
|
|
|
|
| Stair Tread Width | 88cm |
| Overall Clear Width including railing | 94cm |
| Going of each tread (adjustable) | 22 - 26cm |
| Overall Length of stair (variable according to going and location of winder) | 97cm - 326cm |
| UNIVERSAL MAXI U modular stairs - technical details |
| Description Modular open staircase with structure and adjustable spacers in steel and including TWO 90 degree turns. Treads in 40mm thick solid Beech. |
| Overall
footprint size Length variable x Width 750mm or 940mm |
| Number
of steps and heights for stairs with top tread "below-floor" 12steps / 13 risers: min 2110mm - max 3065mm (or max 2825 mm to UK regulations). 13steps / 14 risers: min 2285mm - max 3305mm (or max 3045 mm to UK regulations). 14steps / 15 risers: min 2450mm - max 3545mm (or max 3265 mm to UK regulations). 15steps / 16 risers: min 2635mm - max 3785mm (or max 3485 mm to UK regulations). Heights quoted are based on top tread being fitted "below upper floor". If preferred, top tread can be fitted "flush with upper floor" which will then give an equal number of steps/risers and require one additional Extra Tread Kit. |
| Steps Of 40mm thick solid Beech |
| Risers Standard Min 175mm - Max 240mm (Max 220mm if complying with UK Building Regulations) |
| Railings With steel tubing balusters 25mm diameter and beautiful solid Beech timber handrail 50mm diameter. |
| Finishes
and colours Wood - polished with water based varnish. Metal - Durable epoxy powder coat ( Light Grey RAL7035 ). |
|
|
|
|
|
click
here for PDF of full Misterstep Brochure |
|
click
here for PDF of Universal Maxi Installation Guide |
|
Complete
Staircase delivered FREE UK mainland in a single palletised carton. |
|
COMPLIANCE WITH UK BUILDING REGULATIONS - Universal Maxi 75 is not acceptable as a single MAIN staircase but does comply with regulations provided it is used as a secondary staircase or for access to a mezzanine floor or single room + bathroom and/or WC. It is important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. Universal Maxi 94 DOES comply with UK regulations as a single MAIN staircase but It is still important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. |


|
Tel: 0117 935 4664 Fax: 0117 951 5682 e-mail: sales@ladders999.co.uk Lansford
Access
Ltd
Unit
8A
East
Park
Tr.
Estate
Gordon
Road
BRISTOL
BS5
7DR
U.K.
|