www.ladders999.co.uk
Home
|
Discounts
|
Ordering
|
Delivery
|
Contact
Us
|
About
Us
|
|
SPECIAL
|
UNIVERSAL MINI PLUS
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
UNIVERSAL
MINI PLUS - |
Ingenious "space saver" design allows for steps to be reversed so that the handrail can be fitted to the right or left hand side.
Suitable for minimum overhead opening 150cm x 65cm wide and designed primarily for fitting against a wall. Also suitable for access to vertical openings in a wall and mezzanine floors.
Standard straight staircase comprises eleven steps with handrails. This will suit floor to floor heights up to 288cm ( 9' 5" ).
Additional steps with a handrail available to a maximum floor height of 336cm ( 11' 0" ) - thirteen steps.
Beautifully finished multi-layer beech treads are 40mm / 1.5" thick.
Optional Landing Platform kit, giving "L-shaped", quarter turn at bottom of stair ( as illustrated above ).
Each staircase comes with fully illustrated instructions and free CD showing step-by-step assembly right through to completion of installation.
|
HOW TO SPECIFY YOUR STAIRCASE - UNIVERSAL MINI PLUS |
||
| STEP 1 - Choose your stair - straight or L shape? | Code | |
|
|
Standard Basic Stair Kit ( 11
treads ) - straight Complete 11tread staircase with railing |
MS410 |
|
|
Standard Basic Stair Kit ( 11
treads ) |
.MS410 |
| STEP 2 - Choose your stair height - | |||||
|
Height Options & extra
components required Measure your exact floor-to-floor height (from upper floor level, vertically down to lower floor) & record this height in cm. See chart opposite to see if any Extra Tread Kits are required for your height.
|
Overall Height |
Height of |
No. |
Qty Treads |
Qty |
| 240 - 288 |
20 - 24 |
12 | 11 (standard) | nil | |
| 260 - 312 | 20 - 24 | 13 | 12 | 1 | |
| 280 - 336 | 20 - 24 | 14 | 13 | 2 | |
| 300 - 360 | 20 - 24 | 15 | 14 | 3 | |
| Maximum height for Universal Mini is 14 treads (15 risers) | |||||
|
IMPORTANT NOTE - |
||||
| 240 - 264 |
20 - 22 |
12 |
11 (std) |
nil | |
| 260 - 286 | 20 - 22 | 13 | 12 | 1 | |
| 280 - 308 | 20 - 22 | 14 | 13 | 2 | |
| 300 - 330 | 20 - 22 | 15 | 14 | 3 | |
| STEP 3 - Choose your Main Accessories - add if required | Code | ||
|
Extra Tread Kits |
 |
Extra Tread Kit complete with
railing. |
MJ9/1410 |
| External Railing Kit for 3 treads |
|
External
Railing Kit for 3 treads. - only required if banister is needed on BOTH sides of stair (then order multiple kits as required) or on just the lower treads below a Landing Platform. |
MJ9/10030 |
| Mini-Plus Safety Riser Kit for up to 13 treads |
|
Mini-Plus
Safety
Riser Kit - 13 pieces - used to reduce the vertical gap between treads to less than 10cm. (Required by Building Regulations if stairs could be accessed by young children). |
MJ9/MSRK |
| STEP 4 - Choose your Optional Landing Platform for L shape (1/4 turn) | Code | ||
|
Landing
Platform kits - add if required
|
|
Landing Platform Kit for L shape quarter turn (normally fitted as tread No. 2 or 3 as in top colour photograph) |
MJ9/10040 |
|
External Winder Railing Kit for
Landing Platform - normally fitted to close the open side of the platform which is not against a wall. |
MJ9/10050 | |
| STEP 5 - Choose your optional Top Balustrade components | Code | ||
|
Top Balustrade Kits and
components are optional - add
if required -
The optional Top Balustrade Kits and components can be added to improve the safety and appearance of your staircase. They are designed to surround and guard your upper opening if this is wider than the staircase. |
|||
 |
Balustrade
Kit - for 100cm (1.0m) length - includes 8 balusters & fixings, plus 1
solid Beech Handrail. Can be used for straight edge balustrade. Order multiple kits for long runs. |
|
|
 |
Handrail
Steel Connector Kit Used with handrails to form angled joints. Includes 3 angles + end cap. |
|
|
 |
Baluster-to-Wall
Rigidity Connector - Used for extra strength and rigidity at end of
Balustrade. Sleeves around the baluster and screws into wall. Typically
used at outer end of each balustrade. Recommended. |
|
|
 |
Baluster-to-Baluster Rigidity Connector - Used for extra strength and rigidity at end of Balustrade. Sleeves around two balusters. Typically used to join upper landing balustrade to winding railing on stairs. Recommended. |
|
|
 |
Baluster-to-Floor Rigidity Connector - Used for extra strength and rigidity on Balustrade runs over 1.0m length. Recommended to be fitted every 1.0m max. Can be fitted to upper floor or to vertical face of mezzanine floor level. |
|
|
| STEP 6 - Calculate the price & Order |
|
1/ Print this page -
we suggest you print this page and note the quantity required for each item (see
printing notes). |
|
Problems printing? - if
this page will not print within the width of your paper there are two
solutions. 1/ print in landscape format - in your browser menu click >File >Page Setup>(Orientation) Landscape. 2/ reduce the text size - in your browser menu click >View>Text Size>Medium or Smaller or Smallest (whichever fits). It is helpful & saves paper to see a print preview before printing to check if it will print correctly. Click >File>Print Preview. Buttons for these frequently required operations can be added to your toolbar for convenience. On your browser menu click >View>Toolbars>Customise. Select the required button then click >Add. |
|
COMPLIANCE WITH BUILDING REGULATIONS - Gamia Minis and Universal Minis are not acceptable as a single MAIN staircase but do comply with regulations provided they are used as a secondary staircase or for access to a mezzanine floor or single room + bathroom and/or WC. It is important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. |
|
click
for printable pdf " Mini Plus Installation Guide"
(large, slow, file!!) |
| UNIVERSAL MINI PLUS - VERTICAL DIMENSIONS | |
|
|
Riser height (tread-to-tread height) variable according to your Floor-to-Floor height. Minimum 20cm - maximum 24cm (maximum 22cm if complying with UK Building Regulations) Overall Floor-to-Floor height variable to suit your dimensions. Minimum with all 11 treads 240cm - maximum 288cm ( or maximum 264cm if complying with UK Building Regulations ). Up to three Extra Treads can be added for additional height as shown in Step 2 chart above.
|
| UNIVERSAL MINI PLUS - PLAN DIMENSIONS | |
|
|
|
STRAIGHT STAIR |
. |
| Stair Tread Width | 55cm |
| Overall Clear Width including railing | 61cm |
| Overall Length to tread 1 (11 tread stair) | 156cm |
| Overall Length to tread 2 (11 tread stair) | 143.5cm |
| Additional length for each extra tread fitted | +12.5cm |
| Minimum Length of Overhead Opening (11 tread stair) | 150cm |
| Minimum Width of Overhead Opening | 65cm |
| Going of each tread | 25cm |
|
L SHAPE STAIR including Landing Platform Kit |
. |
 
Landing Platform can be positioned at any height to suit (normally fitted as tread 2 or 3 or 4). Landing Platform can be fitted to turn to Left or Right to suit your location |
|
| Overall Width at bottom with Landing Platform as Tread 2 | 73.5cm |
| Overall Length with Landing as Tread 2 (12 tread stair) | 186cm |
| Additional length for each extra tread fitted | +12.5cm |
| UNIVERSAL MINI PLUS "spacesaver" modular stairs - technical details |
| Description Modular open staircase with structure and adjustable spacers in metal. Special "space saver" paddle-type steps - start with either left foot or right foot as preferred. |
| Overall
footprint size Length 1560mm x Width 610mm Minimum opening (overhead aperture) 1500mm x 650mm for stairs with 11 steps ( slab thickness < 300mm ) |
| Number
of steps and heights for stairs with landing "below-floor" 11steps / 12 risers: min 2400mm - max 2880mm (or max 2640mm to UK regulations). 12steps / 13 risers: min 2600mm - max 3120mm (or max 2860mm to UK regulations). 13steps / 14 risers: min 2800mm - max 3360mm (or max 3080mm to UK regulations). 14steps / 15 risers: min 3000mm - max 3600mm (or max 3300mm to UK regulations). |
| Steps Of 40mm thick Beech plywood ( reversible ) NEW - now available with Landing Platform to give 90 degree quarter turn |
| Risers Standard Min 200mm - Max 240mm (Max 220mm if complying with UK Building Regulations) |
| Railings With steel tubing balusters 25mm diameter and beautiful solid Beech timber handrail 50mm diameter. |
| Finishes
and colours Wood - polished with water based varnish. Metal - Durable epoxy powder coat ( Light Grey RAL7035 ). Plastic components & screws - Black. |
|
click
here for PDF of full Misterstep Brochure |
|
click
for printable pdf " Mini Plus Installation Guide"
(large, slow, file!!) |
|
Complete
Staircase delivered FREE UK mainland in a single palletised carton. |
| COMPLIANCE WITH BUILDING REGULATIONS - Gamia Minis and Universal Minis are not acceptable as a single MAIN staircase but do comply with regulations provided they are used as a secondary staircase or for access to a mezzanine floor or single room + bathroom and/ or WC. It is important, before specifying or ordering a particular model, to check its suitability for your project with your local Building Control Department. |
|
UNIVERSAL
MINI PLUS - |
Optional Mini Landing Platform for quarter turn
Optional Mini Balustrade kit supplied in 1.0m
lengths
|
Tel: 0117 935 4664 Fax: 0117 951 5682 e-mail: sales@ladders999.co.uk Lansford
Access
Ltd
Unit
8A
East
Park
Tr.
Estate
Gordon
Road
BRISTOL
BS5
7DR
U.K.
|
