www.ladders999.co.uk
Home
|
Discounts
|
Ordering
|
Delivery
|
Contact
Us
|
About
Us
|
|
SPECIAL
|
"BOSS ZONE 1"
INDUSTRIAL
| |||||||||||
|
|
|
|
ZONE 1 AREAS - these are defined as areas in which an explosive atmosphere is likely to occur in normal operation. In these areas only Zone 1 rated materials are acceptable. However, there are other areas within industrial and manufacturing processes that represent a greater than usual risk of fire or hazard from electrical or chemical contact or in 'clean' environments associated with food and hi-tec manufacture. When safe access is required in these areas in the course of production or maintenance tasks, the use of GRP products is highly recommended. |
|
- Boss Zone 1 is manufactured from 50mm diameter Glass Reinforced Plastic (GRP). It is fully certified to BS1139 Part 3 1994 (HD1004) and fully complies with the latest Health & Safety regulations.
- Boss Zone 1 towers will not spark, will not oxidise, will not conduct electricity and will not corrode.
- Ladder-frame design has vertical ladders built-in to tower frames. This ensures access ladders cannot be lost or forgotten and also ensures that operatives use the safety of ladder access.
- Maximum safe working load per tower 750kg. Maximum safe working load per platform 225kg.
- Heights up to 12.2m / 40ft.
- Choice of two lengths - 1.8m ( 6ft ) and 2.5m ( 8ft )
- Choice of two widths - 1.45m ( 5’ 0” ) Double Width - the standard size
or 0.85m ( 3’ 0” ) Single Width - for restricted access situations
Glassfibre Safety towers are commonly used in a wide variety of locations and industries - Oil refineries - Off-shore platforms - Aviation industry - Power stations - Electrical engineering - Paint shops - Chemical plants - Food manufacture - Pharmaceuticals - Rail industry - Dock yards and ports - 'Clean' environments - Military applications - Utilities - Gas industry
NON-CONDUCTIVE Boss Zone 1 is non-conductive making it safe to use around electrical installation for repair, inspection and maintenance work. It is particularly appropriate for use in electrical engineering applications and in the rail industry.
NON-SPARKING Static electricity represents a real hazard in many industrial applications. Boss Zone 1 will not 'spark' and is therefore safe to use in areas where dust, vapour or other combustible material is present.
NON-CORROSIVE GRP is a tough, non-corrosive material which is resistant to electrolytic corrosion caused by salt water, deterioration caused by caustic chemicals and damage arising from contact with gasoline, oils, lacquers, and most solvents commonly found in industrial sites.
NON-OXIDISING Unlike aluminium, GRP does not oxidise and so keeps work surfaces clean and residue free. This is essential in food manufacture, food preparation areas and in application which are 'clean' or hygiene sensitive.
22/04/08
|
Tel: 0117 935 4664 Fax: 0117 951 5682 e-mail: sales@ladders999.co.uk Lansford
Access
Ltd
Unit
8A
East
Park
Tr.
Estate
Gordon
Road
BRISTOL
BS5
7DR
U.K.
|
